Protect Your Pride And Joy With The Ghost Immobiliser
Secure your prized possessions against theft by using the Ghost Immobiliser. It’s discreet and doesn’t require additional key fobs in order to operate.
The device uses buttons on your vehicle (steering wheels doors, door panels, and the centre console) to create a unique pin code sequence that can be changed up to 20 times. This allows your vehicle to start.
Simple process to change the PIN code
With the growing rate of vehicle theft, a lot of owners are looking to improve their security. There are many different types of aftermarket security devices, from tracking systems to alarms and immobilisers. However, not all of them are equally effective in protecting your vehicle. A tracking device can assist you in locating your vehicle in the event of it being stolen, but it will not prevent the crime. An immobiliser, on contrary does exactly what it says on the label: it shuts off the engine of your car so that it is unable to be started. The Autowatch Ghost immobiliser is one of the most advanced options available on the market, making it virtually impossible for thieves to take your vehicle.
Utilizing the buttons already in your car The ghost device generates a unique sequence which must be entered before the car’s engine can start. This can be done by using the window, heater or indicator stalk buttons. There is also a mobile application that can be used as an emergency PIN override, allowing the driver to operate their vehicle without the button sequence. This option is particularly useful if you need to give your car away for valet parking or maintenance, as the immobiliser is activated, but not disabled.
The Ghost is a very unique and innovative device which works in conjunction with the buttons of your car instead of being a separate unit. This means that it is not only a highly effective protection against theft of your vehicle, but it can also be transferred onto any other vehicles you may have, making it more of an investment than a traditional steering wheel lock.
Small device that is weatherproof
The Autowatch ghost immobiliser is a sophisticated security system that protects your pride and Ghost Immobiliser Fitting joy against key cloning, hacking & ECU swapping. It is a tiny weatherproof device that connects with the ECU of your vehicle directly via the CAN bus to disable the motor. It can be plugged into the vehicle without the need for extra wiring, and has been thoroughly tested to ensure that it works with all vehicles. It also is resistant to jamming devices, which is a common technique used by car thieves to circumvent the immobilisers in place.
The advantage of using CAN data is that it operates in a silent manner in comparison to conventional systems. It cannot be detected using sophisticated RF scanning and code-grabbing technologies, nor can it be detected by traditional diagnostic tools. The Autowatch ghost doesn’t emit LEDs, but instead utilizes the buttons inside your vehicle like the steering wheel or centre console panels to create a unique, programmable disarm sequence. You can even create a sequence that is as long as 20 presses to provide additional security. The iPhone app is limited to one connection, using an individual pairing code for the Ghost. All communication between the two devices is protected.
The Ghost stops car thieves from adding a new ignition key or replacing the ECU to bypass the immobiliser. It will only allow the engine to start only if the correct pin code is entered. It is also possible to put it in valet/service mode to allow for temporary operation (with specified parameters, such as a 30mph speed limit) so that you can transfer your vehicle to a valet service or for servicing without the need to enter a PIN.
Tested for each vehicle
The Autowatch Ghost is the first aftermarket immobiliser for CANbus. It can be connected to the wiring of your vehicle and also to the engine control unit (ECU). The device snoops on electronic signals to disable your car’s system from performing its normal startup routine until you input an individual passcode. The system can be activated or deactivated through your smartphone’s app without the need for extra wires.
Standard factory immobilisers in vehicles function by using a transponder built into the key that sends a signal to the ECU. If the correct code is transmitted, the car will start however, if the transponder is swapped with one from a different vehicle, the immobiliser will not recognise it. This allows the vehicle to be stolen and then started. The ghost ii immobiliser immobiliser was created by a South African company at the top of security systems for vehicles technology. It protects your car from key cloning, hacking and even key theft. The only way a thief could take your vehicle is physically towing it away and even then, they would not be able to drive it.
Ghost uses the buttons in your car, such as the indicator stalk along with the steering wheel, indicator stalk and door panels to generate an individual PIN sequence that can be changed that needs to be entered before you are able to use your car. This is not required to use extra hardware such as keys-fobs, and can be as long as 20 presses long. It is also inaccessible to diagnostics equipment and doesn’t transmit radio frequency signals so thieves are unable to make use of sophisticated RF scanning or code grabbing technology to detect that security systems have been installed.
In contrast to the physical devices that prevent theft, such as wheel locks or clamps, Ghost is concealed within the vehicle, so it cannot be disabled or removed by thieves and is even more difficult to get rid of than a car alarm, which requires disarming via a button sequence. This makes it an excellent complement to a GPS tracker that can assist in locating your car after it has been stolen.
Emergency PIN code override
You don’t have to go far on social media sites to find stories or even videos of vehicles that have been taken by car thieves employing the latest technology tools available to them. This includes key-cloning devices and hacking devices that allow you to start your car without the original keys.
The ghost immobiliser fitting (Https://fakenews.win) immobiliser helps combat this issue and offers an additional layer of security to stop your vehicle from being stolen when it is targeted by thieves. It creates a unique pin code by pressing the buttons on your steering wheel, door panel, and the centre console. The unique pin code is entered along with the original key fob to prevent the engine from getting started. The unique PIN for override is on the black card that you will receive following your installation and is easy to remember since there aren’t any LEDs.
The device is hidden in the wiring of your vehicle and does not emit radio signals. This means it can’t be detected by diagnostic software that can tell the security system you have installed. This makes it a fantastic alternative to an alarm.
Contrary to other security systems which use a relay in engine bays, these immobilisers using CAN communicate via databus (brand dependent) with the ECU and BCM of the vehicle. This enables them to shut down the vehicle completely through the use of a digital block of commands to both the ECU and the engine.
It is also possible to connect a separate analog immobiliser, alarm or tracker with these systems, but this has to be specified prior to installing the device. They also work with valet/service modes and is a great alternative to a tracker device when you take your car to the dealer to address an electrical problem.
Service/Valet mode
In recent times, there has been an increase in vehicles being stolen from owners without keys. It’s now more easy than ever to take your joy and pride with the availability of key cloning tools & door lock picks. To stop this, we are now offering the Autowatch ghost 2 immobiliser cost immobiliser that prevents your vehicle from being driven even if your keys have been copied or your car has been stolen.
It connects directly to your car’s ECU (Engine Control Unit) through the data loop called CAN. It’s completely silent since it doesn’t use radio frequency or key fobs. It cannot be detected using diagnostics or any other hacking device. It also prevents the addition of an additional key or replacing the ECU to get around the system since only the correct PIN code can allow the engine to start.
The device is concealed inside your car using existing buttons on the steering wheel, the centre console and door panels. Before you can start your car, you need to enter a unique and changeable PIN code that can be as long as 20 digits.
This is the first aftermarket immobiliser CAN bus that has been created that will stop your car ghost immobiliser from being driven away or started without a PIN code being entered prior to. If you are driving away with the device arming, an indicator will appear on your dashboard which will flash continuously for approximately 300m. Entering your PIN code will deactivate the anti-hijack. Your car will continue to run normally. If you don’t enter your PIN code at this point, the warning will continue to flash and will require a new PIN code for every attempt to start your vehicle.
